Leaded diamonds stained glass pattern for a 9 x 60 in sidelight
Diamond quarries inside a border, the oldest leaded-glass pattern there is. Drawn for a 9 x 60 in opening. Many pieces: a project for a patient hand.
Pattern at this size
Other sizes
What is in the pattern
The cartoon
Every piece numbered
The whole panel at a glance, each piece numbered in the order you lay it, with the glass letter on it.
Full-size pages
Cut straight from it
The pattern at 1:1 on Letter pages with overlap marks and a check square, so you never scale it at a copy shop.
The glass list
Buy it once
Square feet of each glass with cutting waste, the copper foil, the solder and the came for the frame, in the palette you pick.
Checked before it is drawn
- No piece too small to cut or too big to hold in lead
- No sharp points that snap while you grind
- Every piece fits the opening and nothing overlaps
- The pieces cover the whole opening, sampled point by point
Measure before you buy
Measure the opening the glass sits in, not the visible glass: for a window sash, the rabbet; for a cabinet door, the back of the frame opening. Take off 1/8 in each way so the panel drops in. How to measure.
The tool roll
-
This panel
Toyo pistol grip glass cutter The oil-fed cutter most studios start with; the pistol grip is easy on the hand for long scores. Check the current price -
This panel
Gryphon Gryphette glass grinder Grinds every piece to the pattern line so the foil sits tight. Check the current price -
Every panel
Edco 7/32 in copper foil, copper backed, 2 rolls The standard width for 1/8 in glass, wrapped around every edge. Check the current price -
Every panel
Zinc U came, 1/8 in, 24 ft The frame around the finished panel; stiff enough for a window. Check the current price -
Every panel
60/40 solder for stained glass, 1 lb Flows and beads well on copper foil seams. Check the current price -
Every panel
Hakko FX-601 soldering iron for stained glass Temperature-controlled, so the bead stays smooth instead of pitting. Check the current price -
Every panel
Novacan Old Master copper foil flux, 8 oz Lets the solder take to the foil. Check the current price -
Every panel
Running pliers and breaker-grozer pliers set Run a score open and nibble a piece to the line. Check the current price
As an Amazon Associate we earn from qualifying purchases.